Scaffolding Frames
Safway Style
 Waco Red Style
Vanguard Style
Biljax Style
Veneer Jacks

Scaffolding Accessories
 Cross Braces
Screw Jacks
Small Parts
Guard Rails
Side Brackets
Stair Units
Replacement Studs
Ladders and Brackets
Pins and Clips

Tube & Clamp
Tube and Clamp

Scaffolding Boards
Scaffold Boards
Pick Boards

Bakers Scaffolding Rolling Bakers Aluminum Bakers  
4' Folding Scaffold

Pump Jacks
Pump Jack Systems

Perry Scaffold/

Perry Scaffolding
Perry Drywall Carts
Step Up Scaffolding


Aluminum Scaffolds
Vault Scaffold
Folding Aluminum 
Aluminum Bakers  
Aluminum Planks
Aluminum Picks

Post Shores
Post Shores

E.I.F.S. Products
Fiberglass Mesh



Back To Scaffold Boards

DI65/ (2200F) SYP Solid Sawn Wood Plank


Kennison Forest Products is a distributor of 2200F MSR 1.8E Solid Sawn Scaffold Plank.

For competitive prices on the strong and reliable 2200F MSR 1.8E Scaffold Plank, please call us today!

2200F MSR 1.8E Solid Sawn Specifications

2200F MSR 1.8E Solid Sawn Scaffold Plank represents an evolutionary enhancement in the qualification of solid sawn scaffold plank versus traditional D165 planks. Our mill’s proof testing process results in lower variability in flat wise bending strength in 2200F MSR 1.8E planks than visual grading alone found in traditional DI65 planks.

•  Meets OHSA/ANSI Standards

•  Available in S4S and Rough Surfaces

•  Available Widths: 2”x10” & 2”x12”

•  Rodded Ends

•  Clipped Corners

•  Custom Embossing

•  Precision End trimming, End Painting,

•  Paper Wrapping also available

Other Products

•  DI65 Solid Sawn Scaffold Plank

   (Available upon request)

•  Plywood

   (Exterior & Interior Fire Retardant, Mill Cert, CDX,

•  Toe Boards
•  High Grade Dimension Lumber 
•  Interior and Exterior Fire Treated Scaffold Plank.


MSR 2200F 1.8E

1 1/2" x 9 1/4"

1 Worker
2 Worker
3 Worker
Max. Deflection
10 Yes No No 2.0
8 Yes Yes No 1.6
7 Yes Yes No 1.4
6 Yes Yes No 1.2
5 Yes Yes Yes 1.0



Proper Use of 1.5” x 9.25” DI65 SYP/ (2200F) Scaffold Plank under dry use ( < 19% moisture content ) that meets the grading rules published by the Southern Pine Inspection Bureau ( 2002 Edition ), approved by the American Lumber Standards Committee and ANSI safety requirements. Meets and/or exceeds OSHA standards.


Conforms to ANSI  A10.8 Loading Requirements



1. Worker and tools weigh 250 pounds = Worker load

2. 1 worker located at span

3. 2 workers located 18” on either side of span center

4. 3 workers located as indicated in requirements 2 and 3 above.







Please note that it is imperative for all workers using these Scaffolding parts and/or Scaffolding accessories to be fully trained and informed in the use of these Scaffolding materials. You may visit our safety page by clicking here to find sources of training and instruction in the use of scaffolding, etc.