Home

Scaffolding Frames
Safway Style
 Waco Red Style
Vanguard Style
Biljax Style
Veneer Jacks

Scaffolding Accessories
 Cross Braces
Screw Jacks
Casters
Small Parts
Guard Rails
Side Brackets
Stair Units
Replacement Studs
Ladders and Brackets
Outriggers
Pins and Clips

Tube & Clamp
Tube and Clamp

Scaffolding Boards
Scaffold Boards
Pick Boards

Bakers Scaffolding Rolling Bakers Aluminum Bakers  
4' Folding Scaffold

Pump Jacks
Pump Jack Systems

Perry Scaffold/
Nu-wave

Perry Scaffolding
Perry Drywall Carts
Step Up Scaffolding

 Shoring
Shoring

Aluminum Scaffolds
Vault Scaffold
Folding Aluminum 
Aluminum Bakers  
Aluminum Planks
Aluminum Picks

Post Shores
Post Shores

E.I.F.S. Products
Fiberglass Mesh

 

Back To Scaffold Boards

 

 
SURE-LAM 2.0E and 2.25E is manufactured in the USA, using only high quality Douglas Fir veneer. The superior strength of Douglas Fir combined with a state of the art manufacturing process ensures that you will get an LVL scaffold plank that you can depend on. For competitive prices on the strong and reliable SURE-LAM LVL Plank, please call us today!
 

SURE-LAM LVL Specifications

SURE-LAM LVL is manufactured in the USA, using only high quality Douglas Fir veneer. The superior strength of Douglas Fir combined with a state of the art manufacturing process ensures that you will get an LVL scaffold plank that you can depend on.

• Meets OHSA/ANSI Standards

• APA/EWS Independent Third Party Inspection

• ICBO 1997 Uniform Building Code-Structural LVL

• Individually Proof Tested

• Custom Embossing

• End Seal Color of Choice

• Custom Lengths and Sizes

• Available in 2.0E & 2.25E

Available widths:

• 9.25”

• 9.50”

• 11.25”

• 11.75"

 

 
 

SUR-LAM 2.0E DF LVL

Loading Conditions

Simple Span

1 1/2"  x 9 1/4" 1 1/2" x 9 1/2" 1 1/2" x 11 1/4" 1 1/2" x 1 3/4"
50 psf 10'-0" 10'-0" 10'-0" 10'-0"
75 psf 9'-0" 9'-0" 9'-0" 9'-0"
1-Person 10'-0" 10'-0" 10'-0" 10'-0"
2-Person 8'-0" 8'-0" 9'-0" 9'-0"
3-Person 5'-0" 5'-0" 6'-0' 6'-0'
 
SUR-LAM 2.25E DF LVL
Loading Conditions Simple Span
1 1/2"  x 9 1/4" 1 1/2" x 9 1/2" 1 1/2" x 11 1/4" 1 1/2" x 1 3/4"
50 psf 10'-0" 10'-0" 10'-0" 10'-0"
75 psf 9'-0" 9'-0" 9'-0" 9'-0"
1-Person 10'-0" 10'-0" 10'-0" 10'-0"
2-Person 8'-0" 8'-0" 9'-0" 9'-0"
3-Person 6'-0' 6'-0' 7'-0" 7'-0"

Applicable Design Standards

  • AS/NZS 4357 : 1995 - Structural laminated veneer lumber.
  • ANSI A10.8 - 2001, Safety Requirements for Scaffolding.
  • OSHA, Occupational Safety & Health Administration, • U.S. Dept. Of Labour, Regulations (Standards - 29 CFR) Scaffold 
  • Specifications - 1926 Subpart L, Appendix A.
  • BS 5973 : 1993 Code of practice for access and working • scaffolds and special scaffold structures in steel.
  • BS 2482 Specification for timber scaffold boards.
  • Products produced can meet FSC standards.

Strength and Stiffness Verification

  1. LVL is periodically sampled from production and tested for Modulus of Elasticity and Modulus of Rupture in accordance with AS/NZS 4357.  In addition,

  2. Each scaffold plank is proof loaded using the CHHWP Quality Control program and its stiffness measured for verification of strength and stiffness claims.

For use in accordance with OSHA

Maximum spans determined for standardized live loads in accordance with OSHA, Standards 29 CFR 1926.451 and Subpart L, Appendix A.

Please note that it is imperative for all workers using these Scaffolding parts and/or Scaffolding accessories to be fully trained and informed in the use of these Scaffolding materials. You may visit our safety page by clicking here to find sources of training and instruction in the use of scaffolding, etc.